| Model | ZZ3257N3647B |
| Engine | Make:SINOTRUK |
| |
| Engine model: WD615.69, Euro II emission standard |
| |
| 4 stroke direct injection diesel engine |
| |
| 6 cylinder in-line with water cooling, turbo-charging & intercooling |
| |
| Maximum output: 336hp(247Kw)at 2200 rpm according to DIN |
| |
| Maximum torque: 1350Nm at 1100~1600 rpm |
| |
| Bore: 126mm; Stroke: 130mm; |
| |
| Displacement: 9.726L; Compression ratio:17:1 |
| |
| Specific fuel consumption: 195g/kWh; Engine oil filling quantity: 23L |
| |
| Cooling system filling quantity (long-term filling): 40L |
| |
| Thermostat opening temperature: 80oC |
| |
| Twin cylinder air compressor Rigid fan |
| |
| Option: Thermostat with 71oC opening begin |
| Clutch | Single- plate dry diaphragm spring clutch, diameter 430(B) mm, hydraulically operating with air assistance |
| Transmission | Transmission, model HW15710, 10 forward and 2 reverse |
| |
| Ratio:14.28 10.62 7.87 5.88 4.38 3.72 2.43 1.80 1.34 1.00 13.91/3.18(R) |
| |
| Option: HW19710, HW19710T |
| Propeller Shaft | Double universal joint propeller shaft with gear-shaped coupling flange |
| Front Axle | Steering with double T-cross section |
| Rear Axles | Casted axle housing, central single reduction with planetary wheel reduction (hub reduction) and differential locks between wheels and axles |
| |
| Ratio: 5.73 Option: 4.80 5.45 4.77 6.5 |
| Chassis | Frame: U-profile parallel ladder type with section of 300×80×8 mm, all cold riveted cross members and reinforced subframe |
| |
| Front suspension: 10 semi-elliptic leaf springs with hydraulic telescopic double-action shock absorbers and stabilizer |
| |
| Rear suspension: 12 semi-elliptic leaf springs with bogie spring and stabilizer |
| |
| With one spare wheel |
| |
| Fuel tank: with 300 L fuel tank with locking fuel cap |
| Steering | ZF8098 , hydraulic steering with power assistance |
| |
| Ratio:22.2-26.2:1 |
| Brakes | Service brake: dual circuit compressed air brake |
| |
| Parking Brake(emergency brake): spring energy, compressed air operating on rear wheels |
| |
| Auxiliary brake: engine exhaust brake |
| |
| Option: ABS |
| Wheel & Types | Rims: 8.5-20, 10 hole-steel |
| |
| Types 12.00R20 tube |
| |
| Option: 11.00-20 tube, 12.00-20 tube 315/80R22.5 |
| Driver’s cab | Long cab, all steel forward control, 55o hydraulically tiltable to the front,2-arm windscreen wiper system with 3 speeds, laminate windscreen, with casted-in radio aerial, hydraulically damped adjustable driver’s seat and rigid adjustable co-driver’s seat, heating and ventilation system, with stereo radio/cassette recorder, sun visor, and adjustable steering wheel, air horn, single berth with 4-point support fully floating suspension and shock absorber with transverse stabilizer,safety belt, air conditioner |
| Electrics | Operating voltage:24V, negative grounded; Starter: 24V, 5.4KW |
| |
| Alternator: 28V, 1540W; Batteries: 2×12, 165Ah |
| |
| Cigar-lighter, horn, headlamp, fog light, reverse lamp |
| Dimensions (mm) | Wheel base | 3625+1350 |
| | |
| Front wheel track | 2022 |
| | |
| Rear wheel track | 1830 |
| | |
| Front overhang | 1500 |
| | |
| Rear overhang | 1739 |
| | |
| Approach angle(o) | 19 |
| | |
| Departure angle(o) | 26 |
| | |
| Overall Dimension | 8214×2496×3386(mm) |
| | |
| Body size | 5400×2300×1400 (mm) |
Weight
(kg) | Permissible loading capacity on chassis | 12650 |
| | |
| Dead weight | 12220 |
| | |
| Gross vehicle weight | 25000 |
| | |
| Front axle loading capacity | 7000 |
| | |
| Rear axle loading capacity | 9000×2 |
| Performance | Maximum driving speed(km/h) | 75 |
| | |
| Maximum gradeablility (%) | 35 |
| | |
| Minimum ground clearance(mm) | 314 |
| | |
| Minimum turning circle(m) | 18 |
| | |
| Fuel consumption(L/100km) | 31 |
